SLX V6-3.2L SOHC (1996)
Installation
To install, follow the removal steps in the reverse order, noting the following points.
1. Be sure to install the door lock cylinder at a right angle to the outside handle.
2. For the anti-theft system, be sure to install the push rod of key switch while pressing it to the door lock cylinder so that there is no continuity
between the key switch side connector terminal No. D6-2 and D6-4 (No. D16-2 and D16-4: passenger side).
3. Tighten the outside handle and key switch fixing bolts to the specified torque.
Torque: 9 Nm (78 lb in)
4. Check for smooth outside handle and lock cylinder operation.
