SLX V6-3.2L SOHC (1996)
4. Window regulator
^
Disconnect the regulator motor connector and remove the window regulator cable fixing clip from door panel (w/power window).
^
Remove window regulator fixing bolts and pull the regulator out from the lower hole of door panel.
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points.
1. Tighten the window regulator and glass fixing bolts to the specified torque.
Torque: 8 N.m (69 lb.in)
2. Install the waterproof sheet with no clearance between the door panel and the waterproof sheet.
