SLX V6-3.2L SOHC (1996)
Brake Pad: Service and Repair
Front
REMOVAL
1. Raise vehicle and remove wheel assembly.
2. Remove lock bolt from caliper.
3. Position caliper upward, then remove shoe, lining assemblies and shims. Mark lining locations if linings are to be reinstalled.
4. Remove shoe clips from support.
INSTALLATION
If original linings are being installed, they must be installed in the original position as marked during removal.
1. Lubricate shims, then install new shoe clips, shims, shoe and lining assemblies to support. During installation of linings to the support, position
wear indicators to lower side of support.
2. Lower caliper into position and install lock bolt to caliper.
3. Install wheel assembly and lower vehicle.
