SLX V6-3.2L SOHC (1996)
Brake Rotor/Disc: Service and Repair
Rear
1. Raise and support vehicle so that rear wheels rotate freely, then remove rear wheels.
2. Remove brake pads as outlined under Brake Pad Service.
3. Remove caliper and caliper frame assembly as an assembly. Release emergency brake cable from support as required. Do not allow caliper to
hang from brake hose.
4. Slide rotor off hub.
5. Reverse procedure to install, noting the following:
a. Thoroughly clean the hub area before installing the rotor.
b. Tighten bolts to specifications.
