SLX V6-3.2L SOHC (1996)
9.
Pull down on the door wire harness to gather any slack. Fold the door harness over itself to remove the slack, then secure it to the 8P connector
with the wire tie.
10.
Reinstall the plastic rain protector.
11.
Reinstall the front door trim panel.
12.
Reinstall the tweeter assembly.
13.
Repeat steps 1 thru 12 for the other power mirror.
14.
Start the engine, and turn on the radio.
15.
While adjusting each power mirror, make sure you hear no static coming from the speakers.
DISCLAIMER