SLX V6-3.2L SOHC (1996)
Radiator Cooling Fan Motor: Service and Repair
1. Remove upper radiator hose, then loosen water pump drive belt.
Fig. 1 Lower Fan Shroud Retaining Clips
2. Remove radiator fan shroud by releasing two clips holding lower shroud to upper shroud, Fig. 1, then remove four bolts holding upper shroud to
radiator and lift shroud out.
Fig. 2 Fan Clutch To Water Pump Nuts
3. Remove nuts holding fan clutch to water pump hub, then lift out fan and clutch assembly.
.
Reverse procedure to install torque fan clutch to water pump flange nuts to 7.4 ft. lbs., Fig. 2.
