SLX V6-3.2L SOHC (1996)
Heater Core: Service and Repair
Rear Heater Core Replacement (Rear Heater - A/C)
1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable and drain cooling system.
3. Remove rear seat, then disconnect heater hoses from rear heater assembly.
4. Remove heater assembly attaching bolts, disconnect blower motor electrical connector, then remove rear heater assembly from vehicle.
5. Remove clamps and remaining heater hoses.
6. Disconnect blower resistor wiring harness, then remove attaching screw and resistor.
7. Remove seal, then the left and right support brackets.
8. Remove attaching screws and front duct assembly.
9. Remove case retaining clips, separate case, then remove heater core.
10. Reverse procedure to install.
11. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
