SLX V6-3.2L SOHC (1996)
9. Install crankshaft pulley temporarily and tighten center bolt by hand (do not use a wrench). Turn the crankshaft pulley clockwise to give some
belt slack between the crankshaft timing pulley and the RH bank camshaft timing pulley.
10. Install the pusher while pushing the tension pulley to the belt.
11. Pull out the pin from the pusher.
Part 1 Of 2
Part 2 Of 2
NOTE: When reusing the pusher, press the pusher to retract the rod and insert a pin (1.4 mm piano wire).