SLX V6-3.2L SOHC (1996)
Engine Control Module: Service and Repair
Powertrain Control Module Replacement
Removal Procedure
1. Disconnect the negative battery cable.
2. Block the wheels.
3. Remove the front console assembly.
3.1 Remove the four screws.
3.2 Remove the transfer shift lever knob by unscrewing the knob.
3.3 Move the transmission gear selector out of the park position.
3.4 Lift up sharply on the back edge of the assembly.
3.5 Disconnect the seat heater switch connectors (if equipped).
3.6 Disconnect the POWER and WINTER switch connectors.
3.7 Lift out the front console assembly.
4. Disconnect the red, white, and blue electrical connectors at the PCM.
5. Remove the two screws in the front of the PCM.
