SLX V6-3.2L SOHC (1996)
Positive Crankcase Ventilation: Service and Repair
POSITIVE CRANKCASE VENTILATION (PCV) VALVE
Removal Procedure
1. Remove the vacuum hose at the PCV valve.
^
Slide the clamp back to release the hose.
2. Pull the PCV valve from the rubber grommet in the left valve cover, near the oil filler cap.
Inspection Procedure
1. Shake the valve and listen for the rattle of the needle inside the valve.
2. If the valve does not rattle, replace the valve.
Installation Procedure
1. Push the PCV valve into the rubber grommet in the left valve cover.
2. Install the vacuum hose on the P0V valve and secure the vacuum hose with the clamp.
