SLX V6-3.2L SOHC (1996)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Idle Air Control (IAC) Valve Replacement
IDLE AIR CONTROL (IAC) VALVE
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the IAC electrical connector.
3. Remove the bolts and the IAC valve from the throttle body.
Installation Procedure
1. Install the IAC valve on the throttle body with the bolts.
Tighten
Tighten the bolts to 1 N.m (9 lb in.).
2. Connect the IAC valve electrical connector.
3. Install the negative battery cable.