acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Ignition Coil Pack|Description and Operation|Page 4084 > < Camshaft Position Sensor|Specifications|Page 4080
Page 1
background image

Ignition Coil Pack: Description and Operation

IGNITION COILS

A separate coil-at-plug module is located at each spark plug. The coil-at-plug module is attached to the engine with two screws. It is installed
directly to the spark plug by an electrical contact inside a rubber boot. A three-way connector provides 12-volt primary supply from the 15-amp
ignition fuse, a ground-switching trigger line from the ignition control module, and a ground.

Ignition Coil Pack|Description and Operation|Page 4084 > < Camshaft Position Sensor|Specifications|Page 4080