SLX V6-3.2L SOHC (1996)
Tighten the rear bolt to 16 Nm (12 lb ft).
5. Connect the electrical connector to the bracket.
6. Install the radiator hose.
7. Install the bypass hose on the upper coolant pipe.
^
Fill the upper radiator hose with coolant before installing the intake manifolds, to ensure that the O-ring seal does not leak.
8. Install the front bolt to the bracket that secures the upper coolant pipe.
9. Install the upper intake manifold. Refer to Upper Intake Manifold.
10. Install the lower intake manifold, Refer to Lower Intake Manifold.
11. Fill the cooling system. Refer to Draining and Filling the Cooling System in Engine Cooling.
