SLX V6-3.2L SOHC (1996)
Air Bag Control Module: Service and Repair
Installation
1. Install the SDM on bracket and fixing bolts and tighten the fixing bolts to the specified torque.
Torque: 10 N.m (87 lb in)
2. Connect the SDM harness connector and after that, put CPA into connector.
3. Install the front console.
4. Install the transmission knob (for M/T) and transfer lever knob.
5. Enable the SRS (Refer to Air Bag(s) Arming and Disarming).
