SLX V6-3.2L SOHC (1996)
10. Connect horn lead.
11. Connect air bag to wiring harness connector.
NOTE: Pass the lead wire through the tabs on the plastic cover (wire protector) of air to prevent lead wire from being pinches.
12. Install air bag into steering wheel and tighten bolts to specified sequence as shown in figure.
Torque: 8 N.m (69 lb.in)
CAUTION: Never use the air bag assembly from another vehicle and difference model year air bag assembly.
The air bag assembly has identification colors on the bar code label as follows. Yellow color for driver air bag assembly. White color for
passenger air bag assembly. Use only new air bag assembly proper to the vehicle which is being repaired.
13. Enable the SRS (Refer to Air Bag(s) Arming and Disarming).
