SLX V6-3.2L SOHC (1996)
"AIR BAG" Warning Lamp Does Not Comes "On" Steady (2/2)
CIRCUIT DESCRIPTION
When the ignition switch is first turned "ON", "Ignition 1" voltage is applied from the "C-22" fuse to the "AIR BAG" warning lamp which is
connected to "SRS Warning lamp", terminal "A7". The "C-21" fuses apply system voltage to the "Ignition 1" inputs, terminals "A8". The SDM
responds by flashing the "AIR BAG" warning lamp seven times. If "ignition 1" is more than 16 Volts, the "AIR BAG" warning lamp will come
"ON" solid with no DTCs set.
