SLX V6-3.2L SOHC (1996)
Purge Flow Sensor: Service and Repair
EVAP PURGE VACUUM SWITCH
Removal Procedure
1. Disconnect the electrical connector from the EVAP purge vacuum switch.
2. Disconnect the hoses from the EVAP purge vacuum switch.
3. Remove the switch from the switch mounting bracket.
Installation Procedure
1. Install the EVAP purge vacuum switch to the bracket.
2. Connect the hoses to the EVAP purge vacuum switch.
3. Connect the electrical connector to the EVAP purge vacuum switch.
