SLX V6-3.2L SOHC (1996)
Steering Wheel: Service and Repair
With Supplemental Restraint System
1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Remove air bag module.
Fig. 2 Steering Wheel Replacement
3. Disconnect horn lead from center of steering wheel, Fig. 2.
4. Remove steering wheel retaining nut.
5. Using steering wheel puller tool No. J-1859-03, or equivalent, carefully remove steering wheel from column.
6. Reverse procedure to install, noting the following:
a. Use caution to not damage harness section of coil when inserting steering wheel into column.
b. Cancel cam of combination switch must be closely inserted into boss hole in steering wheel.
c. Torque steering wheel retaining nut to 25 ft. lbs.
d. Torque air bag module retaining bolts to 44 inch lbs.
8. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
