SLX V6-3.2L SOHC (1996)
Constant Velocity Joint: Service and Repair
Double Offset Joint
1. Remove DOJ inner and outer boot clamps then slide boot towards Birfield Joint assembly.
Fig. 1 Ball From Joint Removal
2. Remove circular clip and withdraw shaft, then using a screwdriver, remove six balls, Fig. 1.
3. Rotate case half a pitch to ensure ball guide aligns with projected portion of ball retainer, then slide towards boot to remove.
Fig. 2 Ball Retainer & Guide Replacement
Fig. 12 Removing or installing snap ring
4. Remove snap ring holding ball retainer on center shaft, then the ball retainer along with cage and boot, Figs. 2 and 3.
5. Inspect all parts for abnormal wear, cracks and damage.
