SLX V6-3.2L SOHC (1996)
23.
Connect the PGM Tester to monitor ATF temperature, then start the engine. With the engine still running, raise the vehicle.
24.
Remove the transmission fill plug, and add about four quarts of Dexron III ATF. (The vehicle should be level when you add the ATF.) If ATF is
not flowing out of the fill hole, add more until it does. Reinstall the fill plug.
25.
Lower the vehicle, but keep the wheels off the ground. With the wheels clear, move the gear selector lever through all its positions; then apply the
brakes, and return the lever to PARK.
26.
Raise the vehicle, and remove the fill plug.
27.
Let the engine idle until the ATF temperature is 90° to 135°F (32° to 57°C). As the temperature of the ATF increases, it will drip out the fill hole
until the correct level is reached.
28.
Reinstall the fill plug with a new gasket, and torque the plug to 38 N.m (28 lb-ft).
29.
Enter the radio station presets, and set the clock.
