acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Customer Interest for Transfer Case Actuator:|96-045|Page 5165 > < A/T - Torque Converter Clutch Solenoid Sets DTC P1860|Page 5158
Page 1
background image

Transfer Case Actuator: Customer Interest
4WD Indicator Always On

October 15, 1996

BULLETIN NO.
96-045

YEAR
1996 - 97

MODEL
SLX

VIN APPLICATION
ALL

4WD Indicator Always On

SYMPTOM

The 4WD indicator remains on when driving in 2WD mode.

PROBABLE CAUSE

One or both of the vacuum solenoid valves has open coil windings.

DIAGNOSIS

1.

Make sure the vehicle is in 2WD mode. Drive it forward at least 100 yards, then brake to a stop.

^

If the 4WD indicator is on, continue to step 2.

^

If the 4WD indicator is not on, the Shift-On-The-Fly system is working properly. Investigate other causes of the customer's complaint.

2.

Remove the skid plate from the Shift-On-The-Fly system.

3.

Disconnect the electrical connectors from the vacuum solenoid valves.

4.

Measure the resistance across the terminals on each vacuum solenoid valve.

^

If the measured resistance of either valve is greater than 50 ohms, continue to CORRECTIVE ACTION.

Customer Interest for Transfer Case Actuator:|96-045|Page 5165 > < A/T - Torque Converter Clutch Solenoid Sets DTC P1860|Page 5158