TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
Keyless Entry Transmitter: Service and Repair
Use the following procedure when replacing one or both remote transmitters:
1. Open the driver's door.
2. Press and hold the driver's master door lock switch up in the UNLOCK position.
3. Quickly insert and remove the key from the ignition switch five times, then insert the key the sixth time, and leave it in the ignition switch. (This
routine must be done within 10 seconds.)
All the doors will lock and unlock to indicate that the control unit is in the program mode.
4. Press either button on the replacement transmitter. All the doors except the driver's door will lock and unlock to indicate that the control unit has
accepted the transmitter into its memory. If either transmitter button is pressed again, all the doors will lock and unlock.
5. To program a second transmitter, press either button on that transmitter. The doors should lock and unlock as described in step 4.
6. Release the driver's master door lock switch.
7. To exit the program mode, close the driver's door or remove the key from the ignition switch.
