TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
Tighten the flare nuts to 19 Nm (1.9 kgf-m, 14 lbf-ft).
4. Start the engine and let it idle for a minute.
Check that:
-
ABS indicator light is off.
-
Brake fluid is not leaking from the brake pipe joints.
5. Stop the engine.
6. Check whether the brake fluid level in the reservoir is at the MAX (upper) level. If level is low, add fresh fluid until the reservoir is refilled to the
MAX (upper) level.
7. Bleed air from the brake system. See: Brake Bleeding/Service and Repair/Modulator Unit Bleeding (ABS)
8. Check the ABS function using the ALB checker. See: Testing and Inspection/Component Tests and General Diagnostics/Function Checks
