acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Tail Lamp > < Lamp Out Sensor|Locations|Page 9753
Page 1
background image

Turn Signal Switch: Service and Repair

On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming

procedures.

2. Remove instrument panel lower cover and knee bolster assembly.
3. Remove upper and lower steering column covers.
4. Disconnect electrical connector from multi-function switch.
5. Remove two mounting screws, then the switch.
6. Reverse procedure to install.
7. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming

procedures.

8. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.

Tail Lamp > < Lamp Out Sensor|Locations|Page 9753