TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
4. Install the knuckle on the tie-rod end, upper arm and lower arm, then tighten the castle nuts and install the new cotter pins.
CAUTION: Torque the castle nut to the lower torque specification, then tighten it only far enough to align the slot with the pin hole. Do not align
the nut by loosening.
5. Install the wheel sensor with the sensor mounting bolts.
6. Install the wheel sensor wire bracket with the two flange bolts.
NOTE: Be careful when installing the sensors to avoid twisting wires.
7. Install the caliper with the caliper bracket mounting bolts.
8. Install the brake hose bracket with the brake hose mounting bolts.
CAUTION: Be careful not to twist the hose more then necessary.
