TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
41. Install the new backup ring on the steering rack, then place the cylinder end seal to piston.
42. Grease the steering rack teeth, then insert the steering rack into the cylinder housing.
CAUTION: Be careful not to damage to inner surface of the cylinder housing with the rack edges.
43. Insert 6" long 3/8" drive extension into the special tool and put them on the rack as shown.
44. Install the cylinder end seal into the bottom of the cylinder by pressing on the tools with a press as shown.
CAUTION: Do not push on the tools with excessive force as it may damage the cylinder end seal.
45. Remove the tools, and center the steering rack.
