TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
Shift Control Solenoid Valve: Testing and Inspection
1. Disconnect the transmission sub-harness connector (14P).
2. Measure the resistance between the No. 4 terminal of the transmission sub-harness and body ground, and between the No. 5 terminal and body
ground.
3. If the resistance is out of specification, disconnect the transmission sub-harness from the shift control solenoid valve harness.
4. Measure the resistance between the No. 2 terminal of the shift control solenoid valve harness and body ground, and between the No. 1 terminal
and body ground.
5. Replace the transmission sub-harness if the resistance is within specification.
6. Replace the shift control solenoid valve assembly if the resistance is out of specification.
7. If the resistance is within the standard, connect the No. 2 terminal of the shift control solenoid valve connector to the battery positive terminal.
-
A clicking sound should be heard.
Connect the No. 1 terminal to the battery positive terminal.
-
A clicking sound should be heard.
Replace the shift control solenoid valve assembly if no clicking sound is heard.
NOTE: If the solenoid valve replacement is required, see Service and Repair.