TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
3. Remove the control unit bracket, then remove the TCM.
4. Inspect the circuit on the TCM according to the troubleshooting flowchart with the special tools and a digital multimeter as shown.
How to use the Backprobe Set
Connect the backprobe adapters to the stacking patch cords, and connect the cords to a multimeter. Using the wire insulation as a guide for the
contoured tip of the backprobe adapter, gently slide the tip into the connector from the wire side until it comes in contact with the terminal end of
the wire.
