TL L5-2451cc 2.5L SOHC G25A4 FI (1995)
Differential Carrier Assembly: Service and Repair
OVERHAUL PROCEDURES
Tools Required
*
07MAD-PR90100 Attachment, 45 x 55 mm, I.D. or Equivalent
*
Dial Indicator
1. Remove the tapered roller bearings using a press as shown.
2. Install the left driveshaft and the intermediate shaft in the side gears.
3. Measure the backlash of both pinion gears.
Standard: 0.05 - 0.15 mm (O.O02-0.006 inch).
Service Limit: 0.30 mm (0.012 inch).
-
If the backlash exceeds the service limit, replace the differential carrier.
3. Install the tapered roller bearings using the special tools and a press as shown.
RING GEAR REPLACEMENT