TL L5-2451cc 2.5L SOHC MFI (1997)
5. Pull out the outer handle with the latch. Pry the outer handle rod out of its joint using diagonal cutters.
NOTE:
^
To ease reassembly, note location of the outer handle rod on the joint before disconnecting it.
^
Take care not to bend the outer handle rod.
^
Use a shop towel to protect the opening in the door.
6. Disconnect the cylinder rod as shown.
NOTE: Take care not to damage the lock cylinder joint.
7. Remove the retainer clip, cylinder protector, cylinder switch and lock cylinder from the outer handle.