acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Trunk / Liftgate Latch|Testing and Inspection|Page 6869 > < Hood Sensor/Switch (For Alarm)|Locations|Page 6864
Page 1
background image

Trunk / Liftgate Latch: Testing and Inspection

1.  Open the trunk lid.
2.  Disconnect the 2P connector from the trunk latch.

Latch Switch Test/Replacement

3.  Check for continuity between the terminals in each switch position according to the table.

Latch Switch Test/Replacement

4.  If necessary, remove the three bolts from the trunk lid, then remove the trunk latch assembly. The switch cannot be replaced separately.

Trunk / Liftgate Latch|Testing and Inspection|Page 6869 > < Hood Sensor/Switch (For Alarm)|Locations|Page 6864