TL L5-2451cc 2.5L SOHC MFI (1997)
Brake Pedal Assy: Adjustments
Pedal Height
1. Disconnect the brake switch connector, loosen the brake switch locknut, and back off the brake switch until it is no longer touching the brake
pedal.
2. Turn up the carpet, and measure the pedal height from the right side center of the pedal pad.
Standard Pedal Height (with carpet removed): 194 mm (7 5/8 inch)
3. Loosen the pushrod locknut, and screw the pushrod in or out with pliers until the standard pedal height from the floor is reached. After adjustment,
tighten the locknut firmly.
NOTE: Do not adjust the pedal height with the pushrod depressed.
4. Screw in the brake switch until its plunger is fully depressed (threaded end touching the pad on the pedal arm). Then back off the switch 1/4 turn to
make 0.3 mm (0.01 inch) of clearance between the threaded end and pad. Tighten the locknut firmly. Connect the brake switch connector.
