TL L5-2451cc 2.5L SOHC MFI (1997)
15. Remove the adjusting bolt.
16. Remove the spring cover, adjusting spring B. spacer, bearing A and cup from the adjusting bolt.
17. Remove the sleeve piston, and remove the pin from the cam in the caliper body.
18. Remove the return spring.
19. Remove the parking lever and cam as an assembly from the caliper body.
CAUTION: Do not loosen the parking nut with the cam installed in the caliper body. If the lever and shaft must be separated, hold the lever in a
vise and loosen the parking nut.
20. Remove the cam boot.
