acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Brake Pad: > < Customer Interest for Brake Pad:|97-025
Page 2
background image

Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Technical Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.

PARTS INFORMATION

Front Brake Pad Set: P/N 45022-SX0-J00 

Rear Brake Pad Set:

3.5RL - P/N 43022-SX0-A5O
2.5TL/3.2TL - P/N 43022-5V5-305 [NEW]

REPAIR PROCEDURE

1.

Remove the old brake pads. (Refer to section 19 of the appropriate Service Manual.)

2.

Apply Molykote M77 on the back of the brake pads and on both sides of the pad shims.

3.

Install the new brake pads and shims, making sure the pad retainers are properly positioned in the caliper bracket and the wear indicator is on the
inside of the caliper.

4.

Test-drive the vehicle, and make sure the squealing noise is gone.

Disclaimer

All Technical Service Bulletins for Brake Pad: > < Customer Interest for Brake Pad:|97-025