TL L5-2451cc 2.5L SOHC MFI (1997)
3. Apply the recommended rubber grease in the caliper seal set to the sealing lips and inside of a new piston boot, and install it in the caliper.
CAUTION: Be careful not to damage the caliper cylinder wall.
4. Lubricate the caliper and piston with brake fluid, then install the piston in the cylinder with the dished end facing in.
5. Install the pad spring on the caliper.
6. Apply the recommended seal grease in the caliper seal set to the sliding surface of the pins and the inside of the new pin boots.
7. Install the pin boots into the grooves in the caliper bracket properly.
8. Insert pin A and pin B into the caliper bracket.
9. Install the pin boots into the grooves in the pins properly.
10. Install the brake pads in their original positions.
