TL L5-2451cc 2.5L SOHC MFI (1997)
11. Turn the shaft clockwise 1/4 - 1/2 turn to compress adjusting spring B in the caliper body.
CAUTION: To prevent damage to the inner components, do not turn the shaft more than 1/2 turn.
12. Lower the locknuts fully and tighten them securely.
NOTE: Keep the locknuts in this position until you reinstall the circlip.
13. Remove the circlip with snap ring pliers.
14. Hold the plate with your fingers, and turn the shaft counterclockwise. Remove the special tool from the caliper.