TL L5-2451cc 2.5L SOHC MFI (1997)
Cruise Control Servo: Testing and Inspection
1. Disconnect the 4P connector from the actuator.
2. Check the output linkage for smooth movement.
3. Connect battery power to the No. 4 terminal and ground to the No. 1 terminal.
4. Check for a clicking sound from the magnetic clutch. The output linkage should be locked.
Actuator Assembly Test
5. If the output linkage is not locked, replace the actuator assembly.
Actuator Assembly Test
6. Check the operation of the actuator motor in each output linkage position according to the table. You should be able to hear the motor.
