TL L5-2451cc 2.5L SOHC MFI (1997)
stop at HOT. If it doesn't, reverse the connections; the air mix control motor should run, and stop at COOL.
NOTE: If the air mix control motor does not run, remove it, then check the air mix control linkage and doors for smooth movement. If they move
smoothly, replace the air mix control motor.
3. Measure the resistance between the No. 2 and No. 3 terminals. It should be approximately 6 K Ohm ± 20%.
4. Measure the resistance between the No. 3 and No. 4 terminals. It should be approx. 1.2 K Ohms ± 20% at MAX HOT and approximately 4.8 K
Ohm ± 20% at MAX COOL.
