TL L5-2451cc 2.5L SOHC MFI (1997)
3. Using a jumper wire, connect the No. 7 terminal individually to the No. 2, 3, 4, 5 and 6 terminals in that order. Each time the connection is made,
the mode control motor should run smoothly and stop.
NOTE: If the mode control motor does not run when jumping the first terminal, jump that terminal again after jumping the other terminals.
The mode control motor is OK if it runs when jumping the first terminal again.
4. If the mode control motor does not run in step 2. remove it, then check the mode control linkage and doors for smooth movement. If they move
smoothly, replace the mode control motor.
