TL L5-2451cc 2.5L SOHC MFI (1997)
7. Remove the two mounting bolts, then lift out the condenser as shown.
NOTE: Be careful not to damage the radiator and condenser fins when removing the condenser.
8. Install in the reverse order of removal. Make note of the following items.
^ If you're installing a new condenser, add refrigerant oil (ND-OIL 8).
^ Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil (ND-OIL 8) before installing them.
NOTE: Be sure to use the right O-rings for HFC-134a (R-134a) to avoid leakage.
^ Be careful not to damage the radiator and condenser fins when installing the condenser and the condenser fan shroud.
^ Be sure to install the condenser mount cushions securely into the holes.
^ Charge the system, and test its performance.