TL L5-2451cc 2.5L SOHC MFI (1997)
9. Remove the clips from the right and left heater ducts, and the SRS main harness clips from the heater unit. Remove the three self-tapping screws,
the six mounting bolts, the bracket and the heater unit.
10. Install in the reverse order of removal. Make note of the following items.
^ Apply sealant to the grommets.
^ Do not interchange the inlet and outlet heater hoses. Make sure that the clamps are secure.
^ Loosen the bleed bolt on the engine, and refill the radiator and the coolant reservoir with the proper engine coolant mixture. Tighten the bleed
bolt when all the trapped air has escaped and engine coolant begins to flow from it.
^ Make sure that there is no air leakage.
