TL L5-2451cc 2.5L SOHC MFI (1997)
Switch Test
5. Disconnect the combination switch harness 18P connector from the main harness.
Switch Test
6. Check for continuity between the No. 4 terminal of the 18P connector of the combination switch harness and body ground with the horn switch
pressed.
^ If there is continuity, the horn switch is OK.
^ If there is no continuity, go to step 7.
Switch Test
7. Carefully remove the cruise control set/resume/cancel switch cover by prying between the cover and the switch in the sequence shown.