TL L5-2451cc 2.5L SOHC MFI (1997)
7. Remove the upper cover and lower cover.
NOTE: Do not use the upper and lower covers for storing removed items.
8. Loosen the adjusting bolt 180°. Push the tensioner to remove tension from the timing belt, then retighten the adjusting bolt.
9. Remove the timing belt.
INSTALLATION
Install the timing belt in the reverse order of removal; Only key points are described here.
1. Set the timing belt drive pulley so that the No. 1 piston is at Top Dead Center (TDC). Align the TDC mark on the tooth of the timing belt drive
pulley with the V pointer on the oil pump.
