TL L5-2451cc 2.5L SOHC MFI (1997)
9. Check that the crankshaft pulley and camshaft pulley are both at TDC.
10. If the camshaft and crankshaft pulleys are not positioned at TDC, remove the timing belt and adjust the positioning following the procedure, then
reinstall the timing belt.
11. After installation, adjust the tension of each belt.
See Drive Belt / Adjustments for alternator belt tension adjustment.
See Drive Belt / Adjustments for A/C compressor belt tension adjustment.
See Drive Belt / Adjustments for P/S pump belt tension adjustment.