TL L5-2451cc 2.5L SOHC MFI (1997)
Vehicle Speed Sensor: Description and Operation
With the ignition switch in ON (II) or START (III), battery voltage is supplied through fuse 1 and the YEL wire to the Vehicle Speed Sensor (VSS). The
sensor is grounded by the BLK wire to G101. The speedometer and other control units in the circuit supply 5 volts or more to the ORN wire. The VSS
intermittently grounds the ORN wire which generates a pulsed signal in it. The number of pulses per minute increases/decreases with the speed of the
car.