TL L5-2451cc 2.5L SOHC MFI (1997)
13. Install the fuel injectors and fuel rail assembly in the intake manifold.
CAUTION: To prevent damage to the 0-rings, install the fuel injectors in the fuel rail first, then install them in the intake manifold.
15. Install and tighten the retainer nuts.
16. Connect the fuel hose to the fuel rail with new washers.
17. Connect the No. 7 vacuum hose and fuel return hose to the fuel pressure regulator.
18. Install the connectors on the fuel injectors.
19. Install the engine harness cover.
20. Turn the ignition switch ON (II), but do not operate the starter. After the fuel pump runs for approximately two seconds, the fuel pressure in the
fuel line rises. Repeat this two or three times, then check whether there is any fuel leakage.
