TL L5-2451cc 2.5L SOHC MFI (1997)
5. Remove the protector (A).
Center Anchor Bolt
Retractor Bolt
6. Install in the reverse order of removal, and note these items:
-
If the threads on the retractor mounting ET screw are worn out, use an oversized ET screw made specifically for this application.
-
Check that the retractor locking mechanism functions.
-
Assemble the washers on the center anchor bolt as shown.
-
Before installing the center anchor bolt, make sure there are no twists or kinks in the center belt.
