TL L5-2451cc 2.5L SOHC MFI (1997)
Seat Belt Retractor: Testing and Inspection
1. Before installing the retractor, check that the seat belt can be pulled out freely.
2. Make sure that the seat belt does not lock when the retractor (A) is leaned slowly up to 150 from the mounted position. The seat belt should lock
when the retractor is leaned over 400. Do not attempt to disassemble the retractor.
Front
Front
Rear
Rear
Rear Center
Rear Center
3. Replace the seat belt with a new one if there is any abnormality.