TL L5-2451cc 2.5L SOHC MFI (1997)
Power Steering Pump: Service and Repair
Reassembly
CAUTION: The power steering components are made of aluminum. Avoid damaging the components during assembly.
NOTE:
-
Clean the disassembled parts with a solvent, and dry them with compressed air. Do not dip the rubber parts in a solvent.
-
Always replace the O-rings and rubber seals with new ones before reassembly.
-
Apply recommended power steering fluid to the parts indicated in the reassembly procedures.
-
Do not allow dust, dirt, or other foreign materials to enter the power steering system.
-
Replace the pump as an assembly if the parts indicated with asterisk (*) are worn or damaged.
PUMP ROTOR INSTALLATION
1. Coat the lip of the new oil seal with steering grease.
2. Install the new oil seal in the pump housing by hand, then install the pump seal spacer.
NOTE: Insert the oil seal with its grooved side facing in.
