TL L5-2451cc 2.5L SOHC MFI (1997)
19. Rotate the pump drive shah manually to make sure the pump drive shaft rotates smoothly.
FLOW CONTROL VALVE INSTALLATION
1. Coat the new O-rings with clean power steering fluid, then install them in the housing grooves.
2. Coat the flow control valve with clean power steering fluid.
3. Install the flow control valve, spring and control valve cover on the pump housing.
4. Tighten the three control cover bolts.
PULLEY INSTALLATION
1. Hold the steering pump in a vise with soft jaws.
CAUTION: Be careful not to damage the pump housing with the jaws of the vise.
2. Install the pump pulley as shown, then install the pulley nut.